บริการตรวจระบบดับเพลิงประจำปี
การตรวจสอบทดสอบและบำรุงรักษา Fire Pump อ้างอิงตาม CODE NFPA 25 ( Standard for the Inspection Testing and Maintenance of Water base fire Protection System : IMT )
The Fire Pump Test Results shall be considered acceptable if all of the following conditions are satisfied :
1.Fire pump meets the flow and pressuer requirements of the most demanding system (s) being supplied by the fire pump based on owner-provided stytem design information.
(2) Fire pump supplies 100 percent of rated flow.
(3) The net pressure at each fiow point is at least 95 percent of one of the following
(a) Original manufacturer " s pump curve
(b) Original unadjusted field test curve
(c) Test curve generated from the pump nameplate
Relate topics
- ตรวจรับรองระบบไฟฟ้า ส่องจุดร้อน Thermoscan infrared camera
- ติดตั้งระบบไฟฟ้าแรงสูงและติดตั้งหม้อแปลงไฟฟ้าขนาด 800 kVA
- Pwer Transformer Major Inspection & Test Trans Thai - Malaysia ( Thailand ) Limited
- ตรวจรับรองระบบไฟฟ้าโรงงาน ตามกฏหมายกรมโรงงานอุตสาหกรรมและกรมสวัสดิการและคุ้มครองแรงาน บริษัท เมอร์กาโต้ เมดิคัล (ไทยแลนด์) จำกัด
- ตรวจรับรองระบบไฟฟ้าโรงงาน ตามกฏหมายกรมโรงงานอุตสาหกรรมและกรมสวัสดิการและคุ้มครองแรงาน SFS Aviation Co. Ltd.
- ส่องจุดร้อนด้วยกล้องเทอร์โมสแกน อินฟาเรด
- Generator Exprosion proof
- ตรวจรับรองระบบกราวด์ประจำปี 2567
- ซ่อม ACB SACE E1N 08 ABB
- ตรวจรับรองระบบไฟฟ้าประจำปี ตามกฏหมายกรมโรงงานอุตสาหกรรมและกรมสวัสดิการและคุ้มครองแรงาน อำเภอหาดใหญ่ สงขลา ภาคใต้ประเทศไทย